LOW-PRESSURE, PUSH-ON HOSE BARBS

LOW-PRESSURE, PUSH-ON HOSE BARBS APPLICATIONS - For Use with Low-Pressure Air, Oil, and Lube Lines - NOT Recommended for Fuel or Refrigerant Applications or for Use in Air Conditioners or Heat Pumps - NOT Appropriate for Applications Involving Extreme Pulsations WORKING PRESSURE Varies Based Upon Hose Used TEMPERATURE RANGE Varies Based Upon Hose Used ASSEMBLY INSTRUCTIONS 1. Lubricate Insert with Soapy or Plain Water 2. Hold Hose and Push On and Up Over the First Barb 3. Continue to Push Straight On Until Hose is Seated Under Protective Plastic Cap. Keep Hands Back from Hose End Area So the Hose Can Expand

LOW-PRESSURE, PUSH-ON HOSE BARBS

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!

Brass and Composite Push-to-Connect air brake fittings are designed to resist mechanical pull-out are easy to assemble and disassemble over and over again. They are designed for use with SAE J844 air brake tubing. Max working pressure is 145 PSI with a temperature range of -40 F/C to 225 F. Tramec Sloan Push-to-Connect fittings meet DOT FMVSS 571.106, SAE J1131, J2494-1, and J2494-3 standards. From under the hood, to the back of the trailer...We've got you covered!